6000AN Series Anodozing Thickness Gauge

Range: 0 - 25 mils (625 µm)
Resolution: 0.05 mil / 0.1 mil (1 µm / 2 µm)
Non-Ferrous Only

The 6000AN Series Anodizing Coating Thickness Gauge is a versatile, rugged tester using eddy current principles to measure coating thickness on non-ferrous metals, accurately and quickly.

Measures Non-Magnetic Coatings (Anodizing, Paint) up 25 mils (0-625 µm) applied to Non-Ferrous metals.

All models are offered in three possible configurations; BASIC (1), STANDARD (2) and MEMORY (3) permitting users to select the feature set most suitable for their application. Refer to table below summarizing the different features included with each type "1", "2" or "3". 

 

 

Feature Comparison Chart

Basic
(1)

Standard (2)

Memory (3)

Hi-Lo limits audibly and visibly alerts when measurements exceed your specified limits

-

 

 

Instantly calculate average, standard deviation, min/max thickness and number of readings while measuring

-

 

 

Reading Storage Capacity

-

250 in one group

10,000 in up to 1000 groups

SSPC PA2 feature set determines if film thickness over a large area conforms to user-specified min/max levels

-

-

 

PSPC 90/10 feature determines if a coating system complies with an IMO performance standard for protective coatings

-

-

 

Built in clock to date and time stamp each stored measurement

-

-

 

Multiple stored calibration adjustments for measuring on a variety of substrate conditions

-

-

 

PosiSoft downloading and charting software (includes USB cable)

-

optional

 

Built-in IR port for printing to an optional portable printer